|
Equipment of the plants THP/SB for the manufacturing of traditional and antiseismic building materials with frame and chamfers along the entire face perimeter ...
Characteristics of the industrial facilities for the plant TRIBOPRESS THP/SB-900 and some parameters of its operation.
industrial facilities
Industrial facilities for the plant should correspond to the following characteristics:
- dimensions – minimal size 45x15x10 meters (length х width х height);
- heating – providing a constant temperature from 10 ºC (minimal) up to 50 ºC (maximal) at any time and season;
- electric power – standard inputs not less than 180 kW, with deviations not more than 5% from the nominal values – 380 V, 50 Hertz;
- water –water inlet with a consumption of not less than 600 l/h;
- illumination – in accordance with the norms for the industrial facilities;
- floors – smooth, without irregularities with concrete covering not less than 20 cm thick all over the premises;
- hollows in the floors – in accordance with the Seller’s drawings.
Readiness of the premises for receipt, storage, assembly and operation of the equipment is a garantee for its good functioning.
installed capacities
Hydraulic Press TSL-2/4-900/12: 1 x 80 kW.
Preparation Line LP-6T/h : 100 kW.
Total installed capacities: 180 kW.
working time
Shift: 7 hours.
Number of shifts per day : 3 shifts.
Number of working days per year : 320 days.
maintenance staff
Number of workers in a shift: 5 workers.
Number of specialists in a shift : 1 specialist.
Total work places in the plant: 18 work places. |
